Application Case

• Halnn CBN tools roughing high manganese steel parts

  High-manganese steel is wear-resistant steel. The manganese content is usually between 10% and 18%. M13, M17, and M17 are common high-manganese steel materials....

  04-30

• Halnn CBN Cutting tools solutions for turning hardened steel gear screw parts

  Hardened steel typical parts include gears, driveshafts, bearings, ball screws, ball cages, synchronizer gear sleeves, HSS rolls, etc. The hardness is above HRC...

  04-22

• Hardened steel hard turning solutions - Halnn recommends CBN grades and inserts

  Turning hardened steel with CBN tools not only simplifies the machining process, lowers costs, and reduces cycle times, it also avoids environmental costs assoc...

  04-13

• Halnn CBN Cutting tools Turning bearing with CBN inserts and Brazed CBN inserts

  The bearing material is generally bearing steel, which is divided into high carbon chromium bearing steel, carburized bearing steel, stainless bearing steel, sl...

  04-06

• Halnn wear-resistant CBN inserts for processing iron-based powder metallurgy

  Powder metallurgy material is a kind of special material. Its difficult processing problems are mainly the wear resistance of the tool and the poor processing e...

  03-29

• Halnn Solid CBN inserts turning high chromium cast iron slurry pump

  Slurry pump the high chromium cast iron material has relatively high hardness. Halnn BN-K1 grade is prefect. it can turn the slurry pump body with a large margi...

  03-22